The wheel rim, also known as the rim, is one of the components of the wheel. The function of the tubeless wheel and rim rolling machine is to roll and shape the wheels, and different types of wheels are rolled differently. Below is a detailed introduction.
Due to the different types of vehicles requiring different grooves to roll out the wheels, existing tubeless wheel rim rolling machines mainly use cylinders to drive the rollers on the equipment spindle to roll the wheels, making the grooves of the wheel rim rolling machine relatively simple. It is impossible to fully meet the needs of different types of wheels.
The tubeless wheel and rim rolling machine includes a frame, upper rollers, and lower rollers. Two hydraulic motors are installed on one side of the frame, and both hydraulic motors are equipped with supporting frames. The output ends of the hydraulic motor are respectively equipped with upper and lower rollers. The upper roller can be slidably connected to the frame, and the corresponding hydraulic motor can be slidably connected to the support frame, and the frame is close to the hydraulic. The motor lifting cylinder is installed on one side of the support frame, and the output end of the lifting cylinder is installed on the hydraulic motor. The end of the upper roller away from the hydraulic motor is equipped with a positioning wheel, and a positioning mechanism is installed between the positioning wheel and the upper roller shaft.
The tubeless wheel and rim rolling machine can be used for cold rolling forming of flat wheels. It can process the wheels of light vehicles, buses, automobiles, agricultural machinery, and small construction machinery. If equipped with responsive auxiliary molds and tools, it can also be used for cold rolling processing of tubeless wheels and metal drums.